Accessible Kitchens - SLIMLIFT Worktop Lift

Different people have different physical capabilities. Some are tall, others are short, some want to be seated while working while others want to stand. So the kitchen in which so much work is being done should obviously be adaptable to the needs of any individual. A lift system that enables cabinets and worktops to be adjusted to the required height makes the work much easier and more enjoyable.

General Info

  • Can be mounted free-standing

  • Can be used without fronts or with optional front height

  • Worktop can be mounted with overhang

  • 80 cm deep worktop can be mounted

  • Maximum legroom alongside motorised leg.

  • Sliding motor facilitates electric and plumbing installations

SLIMLIFT 6230 adjusts the height of the work surface on a straight wall.

Worktops with a depth of 22"-31.5" (56-80 cm) are mounted on the lift. The width can be adapted as required as the design permits the worktop to be mounted with an overhang of up to 4" (10 cm) on either side of the lift.

To obtain the best possible accessibility, the lift can be used without fronts.

Control:
The work surface is adjusted to the optimal height simply by pushing a button. Choose either a Mini control button which is installed under the worktop or remote control.

Safety:
Overload protection: If it is overloaded, the lift stops.

Safety buffer: (accessory)
Installed under the front edge of the worktop When the buffer is touched, the lift stops

SLIMLIFT Worktop Lift Models

Slimlift 75
6230-07504

Slimlift 175
6230-17504

Slimlift 6230 in width 29.5" (75 cm) is
equipped with 1 motor and 2 brackets.

Slimlift 6230 in width 68.9" (175 cm) is
equipped with 1 motor and 3 brackets.

SLIMLIFT Worktop Lift All Sizes

Item ID

Lift width

Planning width

Adjustable Counter 60

21.6" (55cm)

22" (56cm) - 29.9" (76cm)

Adjustable Counter 70

29.5" (75cm)

29.9" (76cm) - 37.8" (96cm)

Adjustable Counter 80

37.4" (95cm)

37.8" (96cm) - 45.66" (116cm)

Adjustable Counter 90

45.3" (115cm)

45.66" (116cm) - 53.54" (136cm)

Adjustable Counter 100

53.2" (135cm)

53.54" (136cm) - 61.7" (156cm)

Adjustable Counter 110

61.0" (155cm)

61.4" (156cm) - 69.3" (176cm)

Adjustable Counter 120

68.9" (175cm)

69.3" (176cm) - 77.2" (196cm)

SLIMLIFT Control Types

Slimlift can be chosen with the following control buttons:


Alu control button


Remote control


MINI control button

SLIMLIFT Worktop Lift Technical Info

110 V

.7" / sec.

11.8" (25.2" - 37" excl. worktop)

330lbs


Planning:

  • Check the condition of the wall (material, positioning of bolts). Reinforce plaster wall with horizontal cross bars as shown in the diagram.

  • Water, drain and electrical connection are placed to the side of the motorised leg.

  • Which control unit is required? An area of 9 cm x 9 cm is required for a recessed control button

  • There must be 0.5 cm clearance between the adjacent cabinet and the worktop to allow space for movement.

  • The lift allows 1.5 cm clearance at the wall for wall covering.

Installation:

  • The SLIMLIFT 6230 comprises three parts. Aluminium beam, brackets and motorised leg.

  • The motorised leg is placed on the floor and screwed to the wall.

  • The aluminium beam is fitted to the motorised leg and adjusted by width and depth.

  • The brackets are slid onto the aluminium beam.

  • The control unit is plugged into the wall socket

  • Worktops and any fronts, sink unit, hob, etc. are mounted.


 

© Universal Design Products

Call 1-877-811-7511